Haijiang Energy Saving 118 Tons Automatic servo Plastic Injection
Molding Machine
Quick Detail:
Industrial Plastic Injection Molding Machine is for normal type
plastic material injection, e.g. PC, PP, PE, Nylon, A.B.S.etc.This
machine is mainly used to produce middle&big industrial parts,
household appliances and other plastic products.Competitive advantages:
Characteristics
1. Adopts the imported control components, durable, safe, and low
failure rate.
2. Use human-computer interface, simple and more visually oriented.
3. The machine uses machine electrical and air linkage, excellent
effect of bottom sealing.
4. East to adjust different sizes of cartons, adjust quickly and
easily, available for a wide range of cartons.
5. Low power consumption, simple and convenient operation, low
noise.
6. Use tap to seal the cartoon bottom, protected from weather,
sealing reliable.
+injection Units
High injection pressure , High injection speed
+HYDRAULIC SYSTEM
Fast respone, stable output
+Electronic Units
intelligent control unit
Electronically Controlled Unit
1.CPU controller and display are independent and reliable.
2.A larger color LCD screen enhances clear display and supports
multi-language compatibility.
3.The control system also supports remote monitor. In the event of
a control problems, the machine can be connected to internet
through a special interface. Inject service can realize remote
fault diagnosis and maintenance.
4.A screen saver function extends the LCD life.
5.Ultra bright LED is provided for input and output point
inspection. Proving convenient indication of the machine’s
operation and machine service
6.A data hardware lock is provided to prevent unauthorized people
from effecting the machines performance.
7.Closed Loop PID barrel temperature control.
8.Dust and waterproof control cabinets provide a neat and tidy
enclosure all electrical control components.
| SPECIFICATION | HJF118 |
| Screw Type | A | B | C |
| Screw Diameter | Mm | 35 | 38 | 40 |
| Screw L/D Ration | L/D | 23.9 | 22 | 20.9 |
| Shot Size(Theoretical) | cm3 | 154 | 181 | 201 |
| Injection Weight(PS) | g | 141 | 165 | 183 |
| Injection Rate | g/s | 80 | 95 | 105 |
| Injection Pressure | MPa | 219 | 186 | 167 |
| Screw Speed | rpm | 0~220 |
| Clamping Force | KN | 1180 |
| Opening stroke | mm | 340 |
| Space Between Tie Bars | mm | 370*370 |
| Max.Mold Height | mm | 400 |
| Min.Mold Height | mm | 150 |
| Ejector Stroke | mm | 100 |
| Ejector Tonnage | KN | 33 |
| Max.Pump Pressure | MPa | 16 |
| Pump Motor Power | KW | 11 |
| Heater power | KW | 6.5 |
| Machine Dimension(L*W*H) | M | 4.2*1.25*1.8 |
| Machine weight | T | 3.5 |
| Oil Tank Capacity | L | 210 |
Haijiang Machinery Main configuration
Standard machinery
| PLC | PORCHESON (TAIWAN) |
| Vane Pump | Albert (USA) |
| Directional Valve | Northman(TAIWAN) /Yuken(JAPAN)/Tokimec(JAPAN) |
| Proportional Valve | HNC (TAIWAN) |
| Electric Motor | Qianlima (CHINA ) |
| Contactor | LS (KOREA) |
| Plasticizing Oil Motor | STF(CHINA) |
| Air Breaker | LS (KOREA) |
| Thermal Overload Relay | LS (KOREA) |
| Limit Switches | Omoron (JAPAN ) |
| Liner Position Sensors (Electric Ruler) | Minor (China) |
| Lubrication Pump | ChaoRun(China) |
Servo machinery
| PLC | PORCHESON (TAIWAN) |
| Directional Valve | Northman(TAIWAN) /Yuken(JAPAN)/Tokimec(JAPAN) |
| Air Breaker | LS (KOREA) |
| SSR(solid state relay) | Fotek(TAIWAN) |
| Plasticizing Oil Motor | STF(China) |
| Limit Switches | Omoron (JAPAN ) |
| Gear Pump | SUMITOMO (JAPAN) |
| Servo Driver | DELTA (TAIWAN) |
| Servo Sensor | ASHCROFT(GERMAN) |
| Servo Motor | Albert(USA)/Phase(ITALY) |
SPARE PARTS( FOR FREE)
| 1. Mold clamping with bolts: 8PCS, | 2. Nozzles: 1PCS, |
| 3. Toolbox: 1SET, | 4. Heating Band: 2PCS, |
| 5. Lubrication Oil: 1 Bucket | 6. Limit Switch: 2PCS, |
| 7. Hexagon Wrench: 1SET, | 8. Thermocouple: 2PCS |
| 9. Seal Ring: 2PCS, | 10. Machine shockproof pads: 6PCS, |
| 11. Vise: 1PCS, | 12. Power socket for auxiliary machines: 2PCS, |
| 13. Wrench: 1PCS, | 14. Screwdriver: 2PCS, |
Note: Different machines, the quantity of free accessories is
different.
Shipping and Payment
| Product Name | 500 Injection molding machine |
| Packing | Export standard package |
| MOQ | 1 set |
| FOB price | Please contact for new price |
| Delivery time | 60days |
| FOB port | Ningbo |
| Payment terms | T/T,L/C at sight
|
